Type N Male 3-Way RF Coaxial T Adapter – 2 Piece Lot
$29.99
Lot of two Type N male 3-way RF coaxial T adapters from surplus RF inventory. Each adapter provides three Type N male coaxial connection points in a T configuration, useful for RF bench setups, antenna experiments, test fixtures, signal routing, temporary monitoring connections, and custom coaxial assemblies.
These are passive coaxial T adapters. They are not matched power dividers, directional couplers, isolators, attenuators, or terminated splitters. Using a passive T in a 50-ohm RF system can create impedance mismatch, reflections, and signal loss depending on frequency, cable lengths, connected equipment, and termination conditions.
The adapters show vintage surplus storage wear and surface oxidation but appear physically complete, with knurled Type N coupling nuts and visible male center pins. Manufacturer, exact part number, impedance, frequency range, VSWR, power rating, plating, and original equipment use are not confirmed. Sold as a 2-piece lot exactly as pictured.
Type N connectors were developed for rugged RF and microwave use and became common in communications systems, antenna installations, laboratory equipment, signal generators, spectrum analyzers, RF test setups, and industrial radio hardware. Passive Type N T adapters are useful bench hardware when a temporary branch, monitoring point, or physical RF connection is needed.
Origin Tracker
Bench Stock
Pulled from RF Boneyard bench/service stock for practical repair and restoration use.
Pipeline quantities are informational and may change after arrival, inspection, sorting, testing, or donor teardown.
Compatible Radios / Boards
Suitable for equipment, cables, antenna systems, test fixtures, RF bench setups, and custom coaxial assemblies using Type N female mating connectors, subject to buyer verification of connector series, gender, impedance, frequency range, power requirements, and system suitability.
This is a passive T adapter and not a matched RF power divider. Buyer must understand that adding a passive T into a 50-ohm RF path may create mismatch, reflections, insertion loss, and changed signal levels. Verify all electrical requirements before use.
RF Boneyard Bench Notes
Connector Identification:
Manufacturer: Unknown
Part Number: Not confirmed
Connector Type: Type N male to Type N male to Type N male RF coaxial T adapter
Configuration: 3-way passive coaxial T
Quantity: 2 adapters
Connector Gender: Male center pins visible on photographed ends
Coupling Style: Threaded knurled coupling nuts
Center Contacts: Male center pins visible
Outer Conductor / Ground: Metal connector bodies and threaded coupling shells
Insulator: Dielectric insulators visible at connector faces
Exact Impedance: Not verified
Frequency Range: Not verified
VSWR: Not verified
Insertion Loss: Not verified
Power Rating: Not verified
Isolation: Not applicable; passive T adapter
Termination Style: Type N male interface on all three ports
Physical Inspection:
Random visual inspection completed on photographed lot.
All three Type N male connector ends appear present on each adapter.
Knurled coupling nuts, metal bodies, dielectric insulators, and center pins appear present.
Vintage storage wear and surface oxidation are visible.
No obvious cracked dielectric or missing center pin observed in photographed samples.
Continuity Test:
Not individually continuity tested.
Port A center pin to Port B center pin: Not tested.
Port A center pin to Port C center pin: Not tested.
Outer shells between all ports: Not tested.
Any center pin to outer shell: Not tested; buyer should verify open / no-short condition before installation.
Bench Evaluation:
PASS - Random physical inspection completed.
PASS - Three Type N male connector interfaces appear present on each adapter.
PASS - Center pins and coupling nuts appear present in photographed samples.
PASS - Sold as surplus passive RF T adapters; buyer must verify exact connector series, impedance, dimensions, and electrical suitability before use.
Ask the bench before you buy.
Post a question about this part
Login or create an account to ask a product question. This helps keep spam out of the RF Boneyard bench.
Login to AskAnswered Questions
No answered questions yet. Be the first to ask the bench.